The solution-derived non-stoichiometric nickel oxide (NiOx) is a promising hole-injecting material for stable quantum dot light-emitting diodes (QLEDs). However, the carrier imbalance due to the misalignment of energy levels between the NiOx and polymeric hole-transporting layers (HTLs) curtails the device efficiency. In this study, the modification of the NiOx surface is investigated using either 3-cyanobenzoic acid (3-CN-BA) or 4-cyanobenzoic acid (4-CN-BA) in the QLED fabrication. Morphological and electrical analyses revealed that both 4-CN-BA and 3-CN-BA can enhance the work function of NiOx, reduce the oxygen vacancies on the NiOx surface, and facilitate a uniform morphology for subsequent HTL layers. Moreover, it is found that the binding configurations of dipole molecules as a function of the substitution position of the tail group significantly impact the work function of underlying layers. When integrated in QLEDs, the modification layers resulted in a significant improvement in the electroluminescent efficiency due to the enhancement of energy level alignment and charge balance within the devices. Specifically, QLEDs incorporating 4-CN-BA achieved a champion external quantum efficiency (EQE) of 20.34%, which is a 1.8X improvement in comparison with that of the devices utilizing unmodified NiOx (7.28%). Moreover, QLEDs with 4-CN-BA and 3-CN-BA modifications exhibited prolonged operational lifetimes, indicating potential for practical applications.
Keywords: dipole moment; hole injection; nickle oxide; quantum dots; work function.
© 2024 Wiley‐VCH GmbH.