Obviously, the dispersion of nanocatalytic materials has significant influence on their catalytic performance. In this study, an evaluation method for the dispersion of nanomaterials was established according to the different solid UV absorptions of different substances by taking the dispersion of nanocopper oxide (nano-CuO) in superfine ammonium perchlorate (AP) as an example. The nano-CuO/superfine AP composites with different nano-CuO dispersions can be obtained by changing the process parameters, such as varying the grinding method, the grinding strength, and the grinding time. Three replicate experiments were carried out for different composites to derive the average values of absorbance at 212 nm, and the dispersion of nano-CuO in superfine AP was calculated using the difference equation, as the solid UV curves at 210-214 nm were almost identical for each sample, especially at 212 nm. The properties of different samples were tested by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and thermogravimetry-mass spectrometry (TG-MS). The results show that the particle size and structure of superfine AP in the composites prepared by different methods were not changed. The XRD and IR techniques in this study were unable to characterize the dispersion of nano-CuO in the composites due to its low content. The dispersion of nano-CuO in the nano-CuO/superfine AP composites was significantly enhanced with the increase of grinding strength and grinding time, and the dispersion of nano-CuO was positively correlated with its catalytic performance, which means that the thermal decomposition performance of different composites improved with the increasing dispersion of nano-CuO. Highly dispersed nano-CuO exhibited a significant catalytic effect on superfine AP in TG-MS. The above conclusions demonstrate the accuracy of the difference equation for evaluating the dispersion of nanomaterials based on solid UV curves, which is expected to be used extensively in evaluating the dispersion of nanocatalytic materials in energetic materials.